EV Charging · 6 min read
How to Install an EV Charger at Home
Installing a Level 2 EV charger requires a load calculation, a dedicated 240V circuit, a permit and an inspection. Here is the full process.
Installing a home EV charger requires a licensed electrician to perform a load calculation, install a dedicated 240V circuit (usually 40 or 60 amps), mount the charger, pull an electrical permit and pass inspection.
Step by step
- Load calculation to confirm your panel can support the charger
- Panel upgrade if existing capacity is insufficient
- Dedicated 240V circuit and breaker installation
- Conduit and cable run to the charging location
- Charger mounting and commissioning
- Permit and municipal inspection
Hardwired or plug-in?
Hardwiring supports higher continuous current and is required for outdoor installs in many cases. A NEMA 14-50 receptacle is more flexible if you may move the charger later.